Compact Light On Off Sensor Radius 9.84 - 19.68ft Detection Range
Ceiling Mounted
ON/OFF Function Microwave Motion Sensor HD412S with Super Compact
Design which could be Applied to Ceiling Light, Downlight or
Tracking Light with Built-in Installation Way
Features:
1. 120VAC 50Hz/60Hz with switch capacity of Max. 100W.
2. TUV RED SAA CE certificated microwave motion sensor.
3. Super compact design for built-in installation of ceiling light
or downlight.
4. Daylight function to smartly detect natural light and artificial
light.
5. DIP switch setting for hold time, daylight threshold and
detection area.
6. ON/OFF Function Switch Sensor.
7. IP20 Built-in installation.
Detailed Specifications:
| Input | Operating Voltage | 120VAC 50Hz/60Hz |
| Stand-by Power | ≤0.5W |
| Output | Load Type | Max. 100W (Control gear); |
Sensor Parameters | Hold Time | 5s/1min/3min/10min |
| Detection area | 50% / 100% |
| Daylight Threshold | 30Lux/Disable |
| Mounting Height | Max.5m(ceiling mounted); Max.3m(wall mounted) |
| Detection Range | Max.12m(ceiling mounted); Max.10m(wall mounted) |
Wireless Parameters | Operating Frequency | 5.8 GHz ±75 MHz |
| Dimming Control | 0N/0FF |
Operating Environment | Operating Temperature | -25℃~+60℃ |
| Certificate | Certificate Requirement | CE / TUV / RED / SAA |
| Others | Wiring Method | 4-pole terminal (Input grey L. N. Output grey N. L’) |
| IP Rating | IP20 (Built-in) |
| Installation Size | 60.6*35.5*25.1mm |
| Packaging Requirement | Bubble bag +Outer Carton(K=A) |
| Lifetime | 50000h |
ON/OFF Daylight Sensor Detection Area Warranty 5 years Hold time
Demensions:
With a super compact design, it's a very small size for ceiling
light, downlight and tracking light.
With a protruding module, it will need to remove a very few light
bead on the board to expose the module out of the metal board
Wiring Diagram:
Simple wiring way with four terminals:
"N,L" connecting with power supply and "N,L'" connecting with LED
driver.
Detection Coverage
Max. detection range will be 12m for ceiling mounted; Max.
Detection range will be 10m for wall mounted.
Typically installation height 2.5-6M. This figure indicates the
maximum distance at the highest mounting height with 100%
sensitivity.
DIP Switch Settings
1 to set detection area.
In this area,movement will be detected and able to trigger the
sensor. 100% detection area is also known as the strong sensitvity. |
2&3 to set Hold time
The period of light keeping 100% brightness after moving objects
leave the detection area. |
4 to set Daylight threshold
Definition of the ambient brightness; only when the ambient
brightness is lower than the preset specific lux amount, the sensor
will work; when it's preset as "disable",the sensor works everytime
it detects motion regardless the ambient brightness. |
Application demo
1. Automatically ON/OFF function
Light on when detect movement and off after people leave at night.
Applications: Corridor, Staircase.
2. No daylight function
The daylight threshold is set to "Disable".
Light on when detect movement, After people leave, Light off after
hold on time. Applications: Dim places such as Basement Parking,
Underpass.
Installation Method
1. Microwave can penetrate walls or glass thinner than 20cm and
attenuate if thicker than 20cm.
2. The driver voltage shall be stable and float within 10%.
3. Detection area will be affected by speed of motion, mounting
height and movement volume
