Planar Antenna 19W Dimmable Motion Sensor Flicker Free Dask Sensor
19W Dimmable Motion Sensor 0.3A 0.35A Antenna Dusk Dawn Driver
Dask Sensor Flicker Free Four current switches Planar Antenna
Features of Dimmable Motion Sensor:
1.The input voltage is 220-240VAC.
2.The protection class is IP 20 in the case of bulid-in
installation.
3.The maximum input current is 0.1A and the maxmium power is 22W.
4.The power factor at rated output is greater than or equal to 80%
5.The total harmonic distortion less than 20%
6.Output control mode is off and dimming(no stroboscopic less than
5%)
Technical data of Dimmable Motion Sensor:
| Model number | HT19V-I |
| Input voltage | 220-240VAC,50Hz/60Hz |
| Input current | 0.1A Max |
| Input power | 22w(Max) |
| Flicker free | <5% |
| Output LED current | 0.3A/0.35A |
| Output LED voltage | 24V-48V |
| Output LED power | 18W |
| Stand-by power | ≤0.5W(230VAC) |
| Empty load voltage | ≤63V |
| Power factor | ≥0.9 |
| Efficiency | 80%(Max.) |
| Microwave frequency | 5.8GHz±75MHz |
| Microwave power | <0.3mW |
| Detection area | 50%/100% |
| Hold time | 5s/60s/5min/10min |
| Daylight threshold | 2Lux/10Lux/50Lux/Disable |
| Stand-by period | 0s/10s/10min/+∞ |
| Stand-by dimming level | 10%/30% |
| Mounting height | Max.6m (ceiling mounted) |
| Deteation range | Max.ø14m (ceiling mounted) |
| Motion detection | 0.5–1.5m/s |
| Packing method | ①the bubble pack, ②paper flat, ③outer carton(400*300*236mm)with
drying agent(100pcs/carton,gross weight kg) |
| Detection angle | 30°-150° |
| Operating temperature | –20℃–+50℃ Tc:80℃ |
| Abnormal protection | SCP:Auto recovery,OVP,OCP,OTP |
| EMC standard | EN55015 |
| Safety standard | EN61347-1 EN61347-2-13 EN60598-1 |
| IP rating | IP 20 |
| Warranty | 3 years |
On/Off Control Detection Area Hold Time Daylight Sensor
Stand-by dimming Stand-by Remote control
level Period
Dtection Area of Dimmable Motion Sensor:
The fixture indicates teh maximun distance at the highest mounting
height with 100% sensitivity.
Typical installation height 2.5-6M.
Detection area:
In this area, movement will be detected and able to trigger the
sensor. 100% detection area is also known as the strong sensitvity.
Hold time:
The period of light keeping 100% brightness after moving objects
leave the detection area.
Daylight threshold:
Definition of the ambient brightness; only when the ambient
brightness is lower than the preset specific lux amount, the sensor
will work; when it's preset as "disable", the sensor works
everytime it detects motion regardless the ambient brightness.
Stand-by period:
The period of light keeping low output before it's completely
switched off. When it's preset as"∞“, the light always keep at low
output if no movement in the detection area and doesn't turn off.
Stand-by dimming level:
The definition of low output in the standby period.
Output Current Setting:
Set the current to be 350mA by plugging black cap on 1&2 PIN,
and 300mA by plugging on 2&3 PIN.
Daylight Priority of Dimmable Motion Sensor:
Dusk/Dawn sensor:
Our special active photocell technology can tell the difference
between natural light and LED light, to
ensure the light will be off when needed.
With Daylight priority function, HT19V-I is able to differentiate
artificial light brightness from
natural light after installed inside the fixture, and automatically
turn off light when ambient
brightness exceeds preset lux level.
Precondition of Daylight priority:
1. Standby period is +∞;
2. Standby dimming level is on 10% or 30%;
3. Daylight threshold is on 2Lux, 10Lux or 50Lux.
Application——Lux on/off:
Light automatically on when With insufficient ambient Light dims to
stand-by level
ambient brightness is lower brightness,light dims to if no motion
detected after
than preset lux level. 100%,when motion holdtime.
detected.
Light off when ambient
lux level is higher than
preset lux amount.
Application of Dimmable Motion Sensor:
1. Automatically ON/OFF function:
Light on when detect movement and off after people leave at
night.Applications:Corridor,Staircase.The daylight threshold is set
to"2Lux,10Lux,50Lux".
With sufficient daylight,even With insufficient daylight, After the
last detection and the
when motion detected,light when motion detected, present hold time
elapsed,
remains OFF. light ON. light OFF.
2. No daylight function:
The daylight threshold is set to"Disable".Light on when detect
movement,after people leave,light off after stand-by
period,Applications:Dim places such as basement parking ,underpass.
When motion is detected, After people leave the After the last
detection and
the sensor will switch on the detection area,light remains the
present hold time
light to 100% brightness. 100% brightness within elapsed,light OFF.
hold time.
3. Function demo-dimable control/corridor function
With sufficient daylight,even With insufficient daylight, After the
last detection the light
when motion detected,light when motion detected, will be dimmed
down to the
remains OFF. light ON. stand-by dimming level
(10% or 30%)after hold time
HT19V
I.pdf
