Microwave 5.8GHz DIP Switch Sensor Drive Detached Design Two In One
Datached Design Dip Switch Sensor Drive Two In One Dimmable
Function
Features of Sensor:
1. 5.8GHz microwave motion sensor with dimmable function.
2. Suitable for Tri-Proof light.
3. Detached version flexible installation.
5. Constant current output.
5. 3 years warranty.
Product Description of Sensor:
| Operating voltage | 220~240VAC 50/60Hz |
| Input current | 0.12A(Max) |
| Input power | 24W (Max) |
| Stand-by power | ≤0.5W(230VAC) |
| Output LED current | 0.3A/0.32A/0.35A/0.38A/0.4A/0.45A ±5% |
| Output LED voltage | 28V~42V DC |
| Output LED power | 8W~19W |
| Operating temperature | Ta: -20°C~50°C Tc: 80°C |
| Empty load voltage | ≤55VDC |
| Power factor | ≥0.9 |
| Microwave frequency | 5.8GHz±75MHz |
| Microwave Power | <0.3mW |
| Mounting Height | 2.5-6m (ceiling mounted) |
| Detection Range | Radius, 4-7m (ceiling mounted) |
| Efficiency | ≥80% (Max.) |
| Detection angle | 30°-150° |
| Method of setting up | Dip switch |
| Detection area | 50%/100% |
| Hold time | 5s/90s/3min/10min |
| Daylight threshold | 15Lux/Disable |
| Stand-by period | 0s/30s/10min/+∞ |
| Stand-by dimming level | 10%/30% |
| Certificate | RoHS CE |
| Motion detection | 0.5~1.0m/s |
| Abnormal protection | SCP: Auto recovery,OVP,OCP,OTP |
| IP grade | IP20 |
| Warranty | 3 years |
Factory Default Setting: Detection area 100%/ Hold time 5s/
Daylight threshold Disable/Stand-by
period 0s/ Stand-by dimming level 10%.
ON/OFF Control Detection Area Hold Time Daylight Threshold Warranty
of 3 years
Stand-by Period Stand-by Dimming Level Remote Control Optional
Current
Dimensional drawing (Unit: mm) of Dimmable Sensor:
HD01VR-4 Wire diameter 4mm, Standard Version Cable Length 480±10mm
(can be customized).
Wiring diagram of Dimmable Sensor
Detection coverage of Dimmable Sensor:
This figure indicates the maximum distance at the highest mounting
height with 100% sensitivity.
Typical installation height 2.5-6m
Setting:
Detection area:
In this area, movement will be detected and able to trigger the
sensor. 100%
detection area is also known as the strong sensitvity.
Hold time:
The period of light keeping 100% brightness after moving objects
leave the
detection area.
Daylight threshold:
Definition of the ambient brightness; only when the ambient
brightness is lower
than the preset specific lux amount, the sensor will work; when
it's preset as
"disable", the sensor works everytime it detects motion regardless
the ambient
brightness.
Stand-by period:
The period of light keeping low output before it's completely
switched off. When
it's preset as"∞“, the light always keep at low output if no
movement in the
detection area and doesn't turn off.
Mode selection:
Sensor mode on when the DIP switch is up; sensor mode off when the
DIP switch
is down.
Stand-by dimming level:
The definition of low output in the standby period.
Installation:
4 styles of installation
Application:
1. Automatically ON/OFF function:
Light on when detect movement and off after people leave at night.
Applications: Corridor, Staircase.
With sufficient daylight, With insufficient daylight, After the
last detection and
even when motion detected, when motion detected, light the present
hold time
light remains OFF. ON. elapsed, light OFF.
2. No daylight function
The daylight threshold is set to "Disable".
Light on when detect movement, After people leave, Light off after
stand-by period.
Applications: Dim places such as Basement Parking, Underpass.
When motion is detected, After people leave the After the last
detection and
the sensor will switch on the detection area, light remains the
present hold time
light to 100% brighteness. 100% brightness within elapsed, light
OFF.
hold time.
3. Function Demo - Dimmable control/Corridor function
With insufficient With sufficient daylight, After the stand-by
After last detection, the
daylight, when motion even when motion period, light OFF. light
will be dimmed
detected, light ON. detected, light remains down to the stand-by
OFF. dimming level
(10%,20%,30% or 50%)
after holdtime.
Attention:
1. Please read the instructions carefully before using this product
and keep it well for all users to
read at any time.
2. The sensor should be installed by qualified electrician and
ensure power is off before the
installation.
3. We reserve the right to modify any incorrect text, image and
necessary technical parameters.
4. Any unauthorized modification is forbidden, otherwise all
guarantees will be immediately invalid.
Installation precautions:
1. Microwave sensor can be installed in any lamp except the one
with full metal shell.
2. The detected surface cannot be shielded by metal objects.
3. Make sure the microwave module is completely exposed outside.
4. The detection surface of the sensor module shall be installed
facing the detection area.
5. Should be kept away from the driver to avoid interference
generation and lamp flashing.
6. Wiring must be strictly in accordance with the wiring diagram to
avoid short circuit.
Application Environment:
1. Suitable for indoor installation to avoid false triggering due
to external factors such as rain, wind or tree swing.
2. Shall not be installed in the place with all four metal shelters
and small space (such as galvanized-iron roof ).
3. Shall note be mounted installation, so as to avoid false trigger
caused by the lamp itself shaking.
4. Shall not be installed next to large operating machines such as
ventilator/ceiling fan to avoid false triggering caused by machine
vibration.
User Notes:
1. Microwave can penetrate walls or glass thinner than 20cm and
attenuate if thicker than 20cm.
2. The driver voltage shall be stable and float within 10%.
3. Detection area will be affected by speed of motion, mounting
height and movement volume.
4. Conduct test on sunny days without the lampshade which will
affect the tested lux value.
