Detached Microwave High Bay Motion Sensor Remote Control Setting
Dawn Sensor Remote Control Setting Detached Design Highbay Motion
Sensor
Features of Dimmable Motion Sensor:
1. Dual setting by DIP switch and remote control.
2. Supporting different installation and applications, for surface
mounting, traditional LED highbay with aluminium reflector, UFO
highbay or linear/triproof highbay.
3. Tri-level control by 1-10V output.
4. Dusk/Dawn Sensor.
5. Sensitive and reliable
6. 8-15m High altitude installation.
7. 5 year warranty.
Technical data of Dimmable Motion Sensor:
| Model number | HD405V-CRH |
| Operating voltage | 120-277VAC,50Hz/60Hz |
| Switching capacity | Max,3.0A@120Vac,50/60Hz; Max,2.0A@277Vac,50/60Hz |
| Stand-by power | ≤1w |
| Control method | On/off / 1-10V Dimming
Dusk/Dawn Sensor
Remote Control |
| Microwave frequency | 5.8GHz±75MHz |
| Microwave power | <0.3mW |
| Detection area | 50%/100% |
| Hold time | 5s/30s/1min/10min |
| Daylight threshold | 2Lux/10Lux/50Lux/Disable |
| Stand-by period | 0s/30s/20min/+∞ |
| Stand-by dimming level | 10%/20%/30%/50% |
| Interfaces | 6-pole pluggable clamp temminal(L,N,PUSH,DALI)for 0.75-1.5mm² cable |
| Mounting height | 8-15m /26.25-49.2ft |
| Deteation range | Max.ø14m/45.93ft |
| Motion detection | 0.5–1.5m/s |
| Packing method | ①the bubble pack, ②paper flat, ③outer carton(400*300*236mm)with
drying agent(70pcs/carton,gross weight 8.17kg) |
| Detection angle | 30°-150° |
| Operating temperature | -30°C~+70°C |
| IP rating | IP 20 |
| Warranty | 5 years |
On/Off Control Detection Area Hold Time Daylight Sensor
Stand-by dimming Stand-by Remote Control 5 Years Warranty
level Period
10-15m Highbay
Dtection Area of Dimmable Motion Sensor:
The fixture indicates teh maximun distance at the highest mounting
height with 100% sensitivity.
Typical installation height 8-15m.
Mechanical structure of Dimmable Motion Sensor:
Support remote control setting parameters.
Dimensions of Dimmable Motion Sensor:
Motion sensor setting and dimming setting please refer to remote
control HD03R.
HD02VRH 1 Wire diameter 4mm,Standard Version Cable Length 485mm(can
be
customized).
Wiring diagram of Dimmable Motion Sensor:
Setting of Dimmable Motion Sensor:
Can also set the parameters with the following nine-digit dialing
code.
Detection area:
In this area,movement will be detected and able to trigger the
sensor.100% detection area is also known as the strong sensitivity.
Hold time:
The period of light keeping 100% brightness after moving objects
leave the detection area.
Daylight threshold:
Definition of the ambient brightness;only when the ambient
brightness is lower than the preset specific lux amount,the sensor
will be work;when it's preset as "disable",the sensor will work
everytime it detects motion regardness the ambient brightness.
Stand-by period:
The period of light keeping low output before it's completely
switched off,when it's preset as"∞",the light always keep at low
output if no movement in the detection area and doesn't turn off.
Stand-by period:
The definition of low output in the stand-by period.
Daylight Priority of Dimmable Motion Sensor:
Dusk/Dawn sensor:
Dual-PD technology brings a fully automatic dusk/dawn sensor which
can tell the difference between
natural light and LED light, to ensure the light will be off when
needed.
With Daylight priority function, HD02VRH 1 is able to differentiate
artificial light brightness
from natural light after installed inside the fixture, and
automatically turn off light when
ambient brightness exceeds preset lux level.
Precondition of Daylight priority:
1. Standby period is +∞;
2. Standby dimming level is on 10%, 20% or 30%;
3. Daylight threshold is on 30Lux, 50Lux, 80Lux or 120Lux.
Application——Lux on/off:
Light automatically on With insufficient ambient Light dims to
when ambient brightness,light dims to standby level if no
brightness is lower 100% when motion motion detected after
than preset lux level. detected. holdtime.
Light off when ambient
lux level is higher than
preset lux amount.
Installation Method of Dimmable Motion Sensor:
Application of Dimmable Motion Sensor:
1.automatically ON/OFF function:
Light on when detect movement and off after people leave at night.
Applications: Corridor, Staircase.
With sufficient daylight,even With insufficient daylight, After the
last detection and the
when motion detected,light when motion detected, present hold time
elapsed,
remains OFF. light ON. light OFF.
2.No daylight function:
The daylight threshold is set to "Disable".
Light on when detect movement, After people leave, Light off after
stand-by period.
Applications: Dim places such as Basement Parking, Underpass.
When motion is detected, After people leave the After the last
detection and
the sensor will switch on the detection area,light remains the
present hold time
light to 100% brightness. 100% brightness within elapsed,light OFF.
hold time.
3.Function demo-dimable control/corridor function
With sufficient daylight,even With insufficient daylight, After the
last detection the light
when motion detected,light when motion detected, will be dimmed
down to the
remains OFF. light ON. stand-by dimming level
(10%,20%,30% or 50%)
after hold time.
After the stand-by period,
light OFF.
Application of Dimmable Motion Sensor:
User Notes:
1. Microwave can penetrate walls or glass thinner than 20cm and
attenuate if thicker than 20cm.
2. The driver voltage shall be stable and float within 10%.
3. Detection area will be affected by speed of motion, mounting
height and movement volume.
4. Conduct test on sunny days without the lampshade which will
affect the tested lux value.
HD405V-CRH specification.pdf
