Indoor Microwave 5.8GHz DALI Motion Sensor Dimmable Planar Antenna
Cooperate With DALI Power Supply Input 120-277VAC RoHS CE
Certification Motion Sensor
Features:
1. 5.8GHz microwave motion sensor with dimmable function.
2. Optional detection range,holdtime,daylight threshold,stand-by
dimming level and stand-by period.
3. DALI power supply needs to be used.
4. Suitable for tri-proof and bulkhead.
5. Supports DIP switch programming parameters which you want.
6. Installation height accessiable 8m.
7. IP 20 with 5 years warranty.
Product Description:
Model number | HDD01 |
Operating voltage | 120-277VAC,50Hz/60Hz |
Switching capacity | Max,3.0A@120Vac,50/60Hz; Max,2.0A@277Vac,50/60Hz |
Stand-by power | ≤1w |
Control method | on/off /1-10v dimming |
Microwave frequency | 5.8GHz±75MHz |
Microwave power | <0.3mW |
Detection area | 10%/50%/75%/100% |
Hold time | 5s/30s/1min/5min/10min/20min/30min |
Daylight threshold | 2Lux/10Lux/50Lux/Disable |
Stand-by period | 0s/10s/1min/10min/30min/1H/+∞ |
Stand-by dimming level | 10%/20%/30%/50% |
Interfaces | 6-pole pluggable clamp temminal(L,N,PUSH,DALI)for 0.75-1.5mm² cable |
Mounting height | 8m /26.24ft |
Deteation range | Max.ø14m/45.93ft |
Motion detection | 0.5–1.5m/s |
Packing method | ①the bubble pack(The main engine and the separation header are
packaged together) ②paper flat, ③outer carton(400*300*236mm)with drying agent (75pcs/carton,gross weight 7.3kg) |
Detection angle | 30°-150° |
Operating temperature | –20℃–+60℃ |
IP rating | IP 20 |
Warranty | 5 years |
ON/OFF Control Detection Area Daylight Threshold
Warranty 5 years Hold Time Stand-by period stand-by dimming level
Detection Range
This figure indicates the maximum distance at the highest mounting
height with 100% sensitivity.
Typical installation height 8m.
Mechanical structure
1-10v dimming
with two installation hole for easy connect the end user lamp
12 DIP switchs set parameters which you want
Settings:
By selecting the combination of the DIP switches,sensor will be
precisely set for different applications.
Detection area: Hold time: Daylight threshold: Stand-by period:
Stand-by dimming level:
In this area, The period of Difinition of ambient The period of
keeping The difinition of the
movement will keeping 100% brightness;only when low output before
low output in the
be detected brightness the ambient brightness it's completely
stand-by period.
and able to after moving is lower than the preset switched off,when
trigger the object leave spercific LUX amount, it's preset as"∞"
sensor,100% the detection the sensor will work; the light always
detection area area. when it's preset keep at low
is also known "Disable" the sensor output if no
as the strong works everytime movement in the
sensitivity. it detects motion detection area and
regardless ambient doesn't turn off.
brightness.
DIP switch setting shift:
If the sensor was set by DIP switch at last time,all setting will
be follow the DIP switch setting no matter any key was changed,for
example:once user changed the detection range by change the switch1
and 2;all other settings(hold time;stand-by period;daylight
sensor;stand-by dimming level will follow the DIP switch setting
even user did not changed the others.
Installation Method:
Application Demo
1. Automatically ON/OFF function:
Light on when detect movement and off after people leave at night.
Applications: Corridor, Staircase.
With sufficient daylight, With insufficient daylight, After the
last detection and
even when motion detected, when motion detected, light ON. the
present hold time
light remains OFF. elapsed, light OFF.
2. No daylight function
The daylight threshold is set to "Disable".
Light on when detect movement, After people leave, Light off after
stand-by period.
Applications: Dim places such as Basement Parking, Underpass.
When motion is detected, After people leave the detection After the
last detection and
the sensor will switch on the area, light remains 100% the present
hold time
light to 100% brighteness. brightness within hold time. elapsed,
light OFF.
3. Function Demo - Dimmable control/Corridor function:
With sufficient daylight, With insufficient After last detection,
the After the stand-by
even when motion daylight, when motion light will be dimmed
period,light OFF.
detected, light remains detected,light ON. down to the stand-by
OFF. dimming level
(10%,20%,30% or 50%)
after holdtime.
